|
|
| » Neuromuscular Stimulators |
Neuromuscular Stimulators
|
|
Sys*Stim® 206
The Sys*Stim 206 is a one-channel neuromuscular stimulator
that features four different waveforms in a light-weight package. The narrow
pulse is suited for TENS while the wide and AC pulses can be used for muscle
stimulation. Direct Current can be used to stimulate denervated muscles or
perform iontophoresis. The Sys*Stim 206 is an ideal companion to the Sonicator
716 for combination therapy.
Weight: 5.6 pounds (2.5kg)
Dimensions: 4.3 in (H) x 6 in (D) x 13.4 in (L),
(11cm (H) xl 15cm (D) x 34cm (L))
Warranty: 1 year
|
|
|
|
Sys*Stim® 208
The Sys*Stim 208 is a one channel, low-volt stimulator
with Surge, Pulse and Tetanize modes. It has easy-to-operate knobs that control
stimulation intensity and frequency, a digital timer and a remote patient
cut0off switch.; It is a small, portable stimulator with a clinical appearance.
Weight: 1.4 pounds
Dimensions: 2.5 in. (H) x 6 in. (D) x 8 in. (L)
|
|
|
|
|
Sys*Stim® 208A
The Sys*Stim 208A is a two-channel, low-volt stimulator
with Surge, Pulse, Tetanize and Reciprocation modes. It has easy-to-operate
knobs that control stimulation intensity and frequency, a digital timer and a
remote patient cut0off switch.; It is a small, portable stimulator with a
clinical appearance.
Weight: 1.5 pounds
Dimensions: 2.5 in. (H) x 6 in. (D) x 8 in. (L)
|
|
|
|
Trio*Stim™ 215
The Trio*Stim is a battery-operated, neuromuscular
electrical stimulator that features three therapeutic modes: TENS, Muscle
Stimulation and Microcurrent. This two-channel unit allows you to provide a
device for pain control with either TENS or Microcurrent stimulation or you can
use the same device for muscle rehabilitation, re-education and spasm
reduction.
Weight: 6.5 ounces, (185g.), with the battery installed
Dimensions: 4.4 in (H) X 2.7 in (W) X 1.0 in (D),
(113 mm (H) x 2.71 mm (W) x 25 mm (D))
Warranty: 2 years
|
|
|
|
Sys*Stim 216
The Sys*Stim 216 is a portable, battery-operated
interferential stimulator. It has three preset frequency sweeps plus a
programmable single frequency selector as well as an automatic vector function.
In addition, the Sys*Stim 216 has a bright digital display and will run for a
full two hours on a single charge.
Weight: 12 ounces, (340 g.), with battery installed
Dimensions: 6 in (H) X 3.9 in (W) X 1.6 in (D)
(15.2 cm (H) x 10 cm (W) x4 cm (D))
Warranty: 2 years
|
|
|
|
Sys*Stim 226
The Sys*Stim 226 provides the flexibility to meet
virtually any clinical need and has unprecedented ease of operation. Clinicians
can choose from a broad range of waveforms, including Interferential,
Pre-modulation, Medium Frequency and Biphasic with adjustable phase duration
and frequency. Additional versatility is provided by a selection of treatment
modes that include Surge, Reciprocation, Surge with Reciprocation and Vector
Rotation. The Sys*Stim 226 can be set up in the two-timer mode so two separate
treatment protocols may be run simultaneously.
Weight: 4.8 pounds (2.2 kg)
Dimensions: 4.3 in (H) x 6 in (D) x 13.4 in (L)
(11cm (H)xl5cm (D)x34cm (4))
Warranty: 2 years
|
|
|
|
Sys*Stim 294
The Sys*Stim 294 is a four channel neuromuscular
stimulator with six stimulation waveforms: Interferential, Premodulated, Medium
Frequency, Biphasic, High Volt and Microcurrent. Up to four different treatment
protocols may be run simultaneously giving maximum treatment flexibility. The
Sys*Stim 294 has soft-touch control knobs to allow the clinician to adjust the
stimulation intensity with confidence.
Weight: 9.4 pounds (4.3 kg)
Dimensions: 5 in (H) x 14.5 in (D) x l0 in (L),
(12.7cm (H) x 36.8 cm (D) x 25.4cm (L))
Warranty: 2 years
|
|
|
All contents Copyright 2011 by SouthPointe Surgical
Supply, Inc. Any information on this website may not be copied, reproduced or
distributed without prior written permission. Privacy
Policy
|
